Best Amplifier For 150rms

A good amplifier for 150rms is a tube amplifier like a tube amplifier made by GE, Vox, or Marshall.

Bestseller No. 1
Rockville RXD-F30 Micro Car/ATV Amplifier 2400w Peak 4 Channel 4x150W RMS
  • Rockville RXD-F30 Micro Car/ATV Amplifier 2400w Peak 4 Channel 4x150W Dyno-Certified RMS.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). .....400 Watts (4 x 100 Watts) @ 4 Ohms and 1% THD+N. .....600 Watts (4 x 150 Watts) @2 Ohms < 1% THD. .....600 Watts (2 x 300 Watts) Bridged @ 4 Ohms < 1% THD.
  • Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). .....2400 Watts (2 x 1200 @ 2 Ohms or 1 x 2400 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Conformal coated circuit board. Water resistant. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry.
  • Fully Adjustable High Pass Crossover: 50Hz - 250Hz. CH1 & CH2 High Pass 50Hz - 250Hz. CH3 & CH4 Low Pass 50Hz - 250Hz<. CH3 & CH4 High Pass 50Hz - 250Hz. Selectable +6dB/+12dB Bass Equalizer. Mute and Delay Soft Start System. Double Sided Surface Mount (SMD) PCB Design.
  • Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. Sensitivity: 100dB @ 1w / 1m. Damping Factor: > 200 @ 100Hz. Dual 30 Amp Maxi Fuse. Dimensions: (W x H x L) 6.7" x 1.98" x 12.28"
Bestseller No. 2
Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 3,000 Watt, 2 Ohm, MOSFET, RCA Input, Bass Boost, Amplifier for Car Speakers, Crossover Network - HTG157
  • AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound
  • INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp
  • GREAT DEAL: Often a monoblock amp comes with a high price tag Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels
Bestseller No. 3
Skar Audio RP-350.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 350W
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
Bestseller No. 4
BOSS Audio Systems PT1600 2 Channel Car Amplifier – Phantom Series, 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 5
2-Channel Mini Hi-Fi 2 x 18W Car Stereo Audio Amplifier, DC9-15V AMP Electrical Portable DIY Amplifier Subwoofer for Speaker Auto Car Motorcycle Tablet PC TV Laptops
  • √ 2 Channels Mini Amplifier - Power LED indicator (red), L / R speaker and B+ power DC jack on left side.
  • √ USB Charging Port - L / R RCA input jack, low / off / pass filter switch and volume knob on right side.
  • √ Lightweight Aluminum Casing - Colored in red. Overload, overheating and short circuit protection.
  • √ Compact and Efficient - Perfect for handling your audio demands in style. Matched with power cable and audio output cable.
  • √ Great Value - If you have a radio, MP3 or other stereo system attached to your car or motorbike, get great sound on the move with this Hi-Fi amplifier which is also a great option for connection to your home theatre or entertainment system.
SaleBestseller No. 6
BOSS Audio Systems R1002 Car Amplifier - 2 Channel, 200 Watts Max Power, 2 4 Ohm Stable, Class AB, Full Range
  • POWER: Maximum Power output of 200 Watts at 2 Ohms into two channels. Maximum power output of 100 Watts at 4 Ohms into two channels
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • VARIABLE INPUT GAIN CONTROL: The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
  • WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com
SaleBestseller No. 7
BOSS Audio Systems R1004 4 Channel Car Amplifier – Riot Series, 400 Watts, Full Range, Class A/B, 2 Ohm Stable, IC (Integrated Circuit) Great for Car Speakers and Car Stereos
  • Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
  • Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal
  • Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
  • Variable Gain Control - The Gain Control Is Not For Adjusting Volume. It Simply Adjusts The Amount Of Signal That Is Coming From Your Receiver And Going To Your Amplifier
SaleBestseller No. 8
AIYIMA A07 TPA3255 Power Amplifier 300Wx2 HiFi Class D Stereo Digital Audio Amp 2.0 Channel Amplifier for Passive Speaker Home Audio (A07+DC 32V Power Adapter)
  • ❶ This AIYIMA A07 power amplifier adopt the TPA3255D2 amp chip and NE5532 op-amp chip.Very Quiet, Runs Extremely Cool,Easy to set up.It's a nice mini audio component amplifiers for Home Audio stereo system
  • ❷ 300W+300W HiFi integrated class D amplifier, Exclusively designed for the customers who pursue HiFi sound,High efficient max power output up to 300 Watt
  • ❸ Two input ways:3.5mm AUX Audio input/ RCA Audio input(3.5mm interface is also Aux Audio output interface(3.5mm AUX sed as audio output can go to connect any Powered device: Speakers, Amplifier,Active Subwoofer ect.).More detail connection and use ways,pls see the main picture shown)
  • ❹ Simple compact design,And the exterior design is delicate and beautiful little amp,It can match with your computer/ desktop /Home theatre system and so on;A computer, an tube preamp(TUBE A3 PRO / T7 / T8), matched with our A07 home speaker amplifier, connected to your home audio passive speakers to form a perfect HIFI system, allowing you to liberate your ears in this noisy city
  • ❺ Package with a DC 32V 5A Power Adapter for free,But if you want to get the maximum power of 300W, you need to buy a power adapter that uses DC 48V and current is above 7A(Cannot use industrial power supply,and please choose the correct passive speaker power to use ).
Bestseller No. 9
Soundstream Stealth Single Shot ST1.500D 150W RMS at 2 Ohms Micro Class D Mono Subwoofer Amplifier 500W Max
  • Premium High-Efficiency Class D Amplifier
  • Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
  • MOSFET Power Supply w/ Audiophile Grade IR Transistors
  • 150W x 1 @ 4 Ohm Mono
  • 500W Max Power
Bestseller No. 10
Rockville dB14 4000w Peak/1000w RMS Mono 2 Ohm Amplifier Car Audio Amp
  • Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
  • Rockville dB14 4000 Watt Peak/1000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 1000 Watts x 1 Channel <1% THD+N. - 4 Ohm: 600 Watts x 1 Channel <1% THD+N.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 4000 Watts x 1 Channel. - 4 Ohm: 2400 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz.
  • Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V.
  • Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 100 Amp Maxi Fuse. Dimensions: (W x H x L) 9" x 2.4" x 15.5"
Bestseller No. 11
YaeCCC C-328 12V 4 Channel Powerful Car Audio Amplifier Bass AMP Aluminum Alloy
  • The internal circuit board is neat and reasonable
  • Placing 8 * 2800 micro method filter capacitors inside
  • Actual power 320W, the peak power is 2800W
  • Placing two sizes of copper rings inside
  • Built in 8 triode (A1941.C5198 Power amplifier tube)
Bestseller No. 12
BLAUPUNKT AMP1804BT Car Audio 4-Channel Class D Amplifier 1600W with Bluetooth Full Range Amp.
  • 1600W Maximum Power Full-Range Amplifier With Bluetooth
  • Optimized 150-watt RMS output and a max power output of 1600 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
  • This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
  • Amplifier Class D 4/3/2 Channel Max. Output Power: 1600W x 4 RMS Power (4 Ohms) 100W x 4 RMS Power (2 Ohms): 150W x 4
  • Frequency Response: 10Hz - 30Hz Signal-To- Noise Ratio: =>90dB Voltage Supply: 11 - 15V DC Gain Adjust: 250mV-6V Dimension: 6.7" x 3.8" x 1.8"
Bestseller No. 13
Rockville dB45 3200 Watt/800w RMS 4 Channel Amplifier Car Stereo Amp, Loud!!
  • Includes: Amplifier. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
  • Features: Rockville dB45 3200 Watt/800 Watt Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp, Loud!!.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 200 Watts x 4 Channel <1% THD+N . - 4 Ohm:135 Watts x 4 Channel <1% THD+N. - 4 Ohm Bridged: 400Watts x 2 Channel<1% THD+N.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 800 Watts x 4 Channel. - 4 Ohm:540 Watts x 4 Channel. - 4 Ohm Bridged: 1600 Watts x 2 Channel. High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Tertiary Supplies Circuitry. Optical Coupler Class “AB” Technology. Studio-Grade Bipolar Output Stage Transistors.
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 3KHz. High Pass Filter: 15Hz - 1KHz. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 10Hz - 50KHz. Damping Factor: >150 @ 100Hz. 35 Amp*3 ATC Fuse. Dimensions: (W x H x L) 9" x 2.4" x 21.0"
Bestseller No. 14
Rolls DA134 4-Channel Distribution Amplifier
  • Stereo 4 channel distribution amplifier - Front panel volume controls
  • Mono or Stereo operation - DC low end frequency for audiophile frequency response
  • Accepts inputs directly from I-pad / I-pod or laptop
  • Stereo pass thru: For connection to another DA134
  • Small compact design - Included Rolls PS27s power supply.
SaleBestseller No. 15
Pioneer GM-A3702 2-Channel Bridgeable Amplifier ,Black/red
  • 500 Watts Max Power
  • Automatic signal sensing and Turn-On
  • Hi-Volt input level control
  • Balanced isolator input circuit