Best Class Of Car Amplifier

Bestseller No. 1
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150<
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
Bestseller No. 2
BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 3
Planet Audio PL3000.1D Class D Car Amplifier - 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
SaleBestseller No. 4
Blaupunkt AMP1904D Universal Car Speaker Amplifier Class D 4-Channel 1800 Watts Max Power
  • Amplifier Class: D. Max Output Power: 1800W.
  • RMS Power (2 Ohms): 170W x 4. RMS Power (4 Ohms): 120W x 4.
  • Frequency Response: 10Hz-30Hz. Signal to Noise Ratio: => 96dB
  • Voltage Supply: 11-15V Dc. Gain Adjust: 250mV-6V
SaleBestseller No. 5
BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply, Stereo
  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
Bestseller No. 6
BLAUPUNKT AMP1804BT Car Audio 4-Channel Class D Amplifier 1600W with Bluetooth Full Range Amp.
  • 1600W Maximum Power Full-Range Amplifier With Bluetooth
  • Optimized 150-watt RMS output and a max power output of 1600 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
  • This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
  • Amplifier Class D 4/3/2 Channel Max. Output Power: 1600W x 4 RMS Power (4 Ohms) 100W x 4 RMS Power (2 Ohms): 150W x 4
  • Frequency Response: 10Hz - 30Hz Signal-To- Noise Ratio: =>90dB Voltage Supply: 11 - 15V DC Gain Adjust: 250mV-6V Dimension: 6.7" x 3.8" x 1.8"
Bestseller No. 7
Planet Audio TR3000.1D Class D Car Amplifier - 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • 3000 W MAX Power X 1, 2250 W X 1 RMS @ 1 ohm, 1125 W X 1 RMS @ 2 ohm, 563 W X 1 RMS @ 4 ohm 4500 W X 1 RMS Strapped Bridged Power @ 2 ohm
  • Monoblock Class D, MOSFET Power Supply
  • Low Level Inputs, RCA Pre-amp Outputs
  • Variable Low Pass Crossover, Variable Bass Boost, Variable Subsonic Filter, Switchable Phase Control
SaleBestseller No. 8
BOSS Audio Systems PT1600 2 Channel Car Amplifier – Phantom Series, 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 9
Audiobank Monoblock 8000 WATTS Amp Class D 1ohm Car Audio Stereo Amplifier Remote Turn On/Off Circuit/Heavy-Duty Aluminium Alloy Heatsink Power and Protection Indicator P8001
  • 1 Ohm Stable Operation & Soft Turn On Circuit
  • Thermal and Speaker Short Protection Circuitry
  • Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
  • Remote Turn-On / Turn-Off Circuit
  • LED Power and Protection Indicators
SaleBestseller No. 10
BOSS Audio Systems R1004 4 Channel Car Amplifier – Riot Series, 400 Watts, Full Range, Class A/B, 2 Ohm Stable, IC (Integrated Circuit) Great for Car Speakers and Car Stereos
  • Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
  • Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal
  • Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
  • Variable Gain Control - The Gain Control Is Not For Adjusting Volume. It Simply Adjusts The Amount Of Signal That Is Coming From Your Receiver And Going To Your Amplifier
Bestseller No. 11
Luibor Kicker CX400.1 400 Watt Class D Mono Amplifier Power System Device for Car Audio Speaker with Sound Control Dial, Black
  • Efficient high-quality Class-D amplifier is an ideal addition for your vehicle with a 3 second on/off delay to eliminate unwanted interference
  • Equipped with a 12 dB crossover that lets you control the dial to optimize your sound for the ultimate performance
  • Features 6 dB variable bass boosts for any low frequencies you run into and 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • Includes vertical mounting hardware for another unique look; Compatible with CXARC remote bass control (sold separately)
  • Accepts up to 40-volt input signal; Power (watts/ch) 4 Ohm: 150 x 1, 2 Ohm: 300 x 1, 1 Ohm: 400 x 1; Frequency response (Hz): 25-200, +0/-1 dB
SaleBestseller No. 12
BOSS Audio Systems PF2200 Phantom 2200 Watt, 4 Channel, 2 4 Ohm Stable Class AB, Full Range, Bridgeable, Mosfet Car Amplifier with Remote Subwoofer Control
  • 550 W MAX Power @ 2 Ohm x 4 Channels
  • 275 W MAX Power @ 4 Ohm x 4 Channels
  • 1100 W MAX Bridged Power @ 4 Ohm x 2 Channels
  • Full-Range, Class A / B Topology, MOSFET Power Supply
  • Low and High Level Inputs, Variable Filter, Variable Bass Boost
Bestseller No. 13
Orion Cobalt Monoblock Amplifier – Class D Amplifier 1500W RMS 3000W Max, Car Electronics Car Audio Stereo Subwoofer 1 Ohm Stable Bass Boost MOSFET Full Range Amplifier for Car Speakers Sub Amp
  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others.
  • 1 Ohm Stable - This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively.
  • Low/High Level Inputs – The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Features – The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift
  • Power – This Class D 3000 watt Amplifier has a power rating distribution as followed 3000 X 1 MAX @ 1 OHM. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
SaleBestseller No. 14
Lanzar B52 Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG137) , BLACK
  • AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
  • INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
  • GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.
Bestseller No. 15
Infinity Primus 9004A 4 Channel High Power Class A/B Car Amplifier (RMS: 90 4 @4ohms 110 4 @ 2ohms)
  • Operating voltage 9 – 16V RMS power @ 4 ohms 90WRMS power @ 2 ohms 110W RMS bridged power @ 4 ohms 220W Total peak power 880W
  • Frequency response 20Hz – 20kHz @ -1dB THD + N at rated power (20Hz – 20kHz)<1% Line-in signal-to-noise ratio (reference to 1 watt)>75dB
  • Maximum high input signal level 12V High input maximum sensitivity 0.5V Maximum line input signal level 5V Line input maximum sensitivity 0.2V
  • Quiescent current draw<1.5A Fuse size 2 x 20A Dimensions (H x W x L) 2.02 x 5.8 x 10.74 inches